EstimateElitePrice my project
2027 prices

How Much Does a Kitchen Remodel Cost in Dallas?

A mid range kitchen remodel in Dallas costs $52,293 at current prices for a 150 square foot room. Basic starts at $29,438 and high end reaches $106,031. Projected into 2027, mid range moves to $52,753.

By Joe Petocz, EstimateElite. Updated .

What does a kitchen remodel cost in Dallas by finish level?

These are current prices for a 150 square foot kitchen in the Dallas metro area. That is roughly a 12 by 12.5 foot room, a common footprint in the ranch homes and mid century builds that make up a large share of the DFW housing stock.

At the basic level you get stock cabinets, laminate countertops, a builder grade appliance package and no layout changes. Mid range is the most popular tier: soft close cabinetry, quartz countertops, a tile backsplash, upgraded appliances and a design plan. High end means custom cabinetry, natural stone countertops, a paneled refrigerator, wine storage, a vented range hood and premium fixtures throughout.

Labor is a significant share at every level. At mid range, labor is $21,923 out of the $52,293 total. The BLS reports a national mean annual wage of $65,630 for carpenters as of May 2025 1. In our pricing data, Dallas labor for this scope is $21,923 versus $22,370 nationally, which keeps the overall project cost close to the national figure.

Kitchen remodel cost in Dallas (150 sq ft, current prices)
Finish levelTotalMaterialsLaborPer sq ft
Basic$29,438$13,524$13,238$196
Mid range$52,293$25,616$21,923$349
High end$106,031$60,230$36,162$707
Current Dallas prices from our pricing engine. Your actual quote will depend on the space, access and materials chosen.

Get your kitchen price in 60 seconds

Answer a few questions about your Dallas kitchen and see a cost breakdown before you talk to anyone.

Free. Your ZIP, your size, your finishes. No account.

Where does the money go? Top line items in a Dallas kitchen

Cabinetry is the largest single expense at every tier. At mid range, lower cabinets run $7,742 and uppers add $6,321, totaling $14,063 before hardware. Open floor plan homes common in north Dallas neighborhoods like Lake Highlands and Richardson often have longer cabinet runs, which pushes that number higher.

The table below shows the ten largest line items at mid range in the Dallas area.

Top 10 mid range line items (150 sq ft Dallas kitchen, current prices)
ItemCost
Lower cabinets$7,742
Upper cabinets$6,321
Countertop$3,430
Flooring$3,038
Refrigerator$2,332
Demolition$2,254
Pantry cabinet$2,107
Range$1,617
Backsplash$1,568
Plumbing$1,421

Dallas vs. the national average: why is it slightly cheaper?

A mid range Dallas kitchen costs $52,293 versus $53,361 nationally for the same 150 square foot scope. That is a $1,068 difference in your favor. Both labor and materials come in a bit lower here.

Dallas labor for a mid range kitchen is $21,923 versus $22,370 nationally, a $447 gap. Dallas construction labor wages grew 2.1% year over year in our most recent data, compared to 2.4% nationally. The DFW metro has a large pool of residential trade workers built up over decades of steady homebuilding, which keeps labor rates competitive.

Materials are $25,616 in Dallas versus $26,140 nationally, a $524 difference. Texas has no state income tax and lower regulatory overhead, which helps hold supply costs down. That said, Dallas contractors often spec moisture resistant drywall and treated lumber for the hot, humid summers, and those upgrades close part of the gap.

2027 projection: will Dallas kitchen remodel prices go up?

Our 2027 projection for a 150 square foot kitchen in Dallas is $29,716 basic, $52,753 mid range and $106,790 high end. That is a modest increase from current prices across all three tiers.

Dallas construction labor wages grew 2.1% year over year in our data, slightly below the 2.4% national average. Population growth in the DFW metro continues to bring new construction activity, but the large existing labor pool has kept wage growth moderate compared to faster growing markets.

2027 projected kitchen remodel cost in Dallas (150 sq ft)
Finish level2027 projected total
Basic$29,716
Mid range$52,753
High end$106,790
2027 projections from our pricing engine. Final costs vary by scope, finishes and site conditions.

Dallas permits, clay soil and local conditions that change the price

Dallas does not require a building permit for purely cosmetic kitchen work. Replacing cabinets, countertops, flooring, paint and backsplash on the same footprint generally falls under routine interior cosmetic work that does not require a permit. You do need permits when the work involves plumbing relocations, new electrical circuits or structural changes to the floor plan. Our pricing engine builds in $539 to $735 for the permit line item depending on finish level.

The DFW metro sits on expansive clay soil that swells when wet and shrinks when dry. This causes foundation movement over time. If your slab has shifted and the kitchen floor is no longer level, the contractor will need to address that before laying new tile or hardwood. Foundation leveling is outside the scope of a standard kitchen remodel but can add thousands to the total project if it surfaces during demolition. Ask your contractor to inspect the slab before signing a contract.

Federal rules apply to homes built before 1978. The EPA states that in general, anyone who is paid to perform work that disturbs paint in housing and child occupied facilities built before 1978 must be certified 4. Many homes in the M Streets, Lakewood and Oak Cliff neighborhoods were built in the 1920s through 1960s, so this rule applies to a meaningful share of central Dallas housing.

How to verify your contractor in Texas

Texas does not license general contractors at the state level. The state licenses specific trades individually. The TDLR states that anyone who performs electrical work in the state of Texas must be licensed 2. HVAC contractors also need a state license: contractors who install, repair, or maintain systems related to air conditioning, refrigeration, or heating must have a TDLR license 3. Plumbers are licensed separately through the Texas State Board of Plumbing Examiners.

Dallas does not require general contractors to register at the city level. That means the burden is on you to verify credentials before work begins.

  • Look up the electrician at the TDLR license search page 2
  • Look up the plumber at the Texas State Board of Plumbing Examiners license search
  • Request proof of general liability insurance from your general contractor
  • Ask for workers compensation coverage documentation
  • For pre 1978 homes, confirm the contractor holds EPA RRP firm certification 4
  • Check references from recent kitchen projects in the Dallas area

Worked example: mid range 150 sq ft kitchen in a 1960s Lake Highlands ranch

Example: You own a 1960s ranch in Lake Highlands with a 150 square foot kitchen. The original cabinets are worn, the laminate countertops are chipped and the layout still works but every surface needs replacing. You want quartz countertops, soft close cabinets, a subway tile backsplash and new appliances throughout.

Using our Dallas pricing data, the mid range total is $52,293. Materials account for $25,616, labor for $21,923 and contingency for $4,754. The permit line item is $637.

The national mid range price for the same 150 square foot kitchen is $53,361. That puts your Dallas project $1,068 below the national number. Labor accounts for $447 of that savings and materials for another $524.

Because this is a 1960s home, your contractor should test for lead paint before demolition begins. The foundation should also be inspected for settling before new flooring goes down. If the clay soil has caused uneven movement over the decades, the contractor will flag it during the tear out phase.

Questions

Common questions.

Only if the work involves plumbing relocations, new electrical circuits or changes to the floor plan. Replacing cabinets, countertops, flooring, paint and backsplash on the same footprint does not require a building permit in Dallas.

Get your kitchen price in 60 seconds

Answer a few questions about your Dallas kitchen and see a cost breakdown before you talk to anyone.

Free. Your ZIP, your size, your finishes. No account.

Are you a contractor?

Homeowners reading this page want a number before they call you.

Put this same price tool on your own website with your prices. You see every homeowner's budget before you pick up the phone, so you stop driving out to people who can't afford the job.

See how it works for contractors

Sources

  1. BLS 2025 OEWS Release, Skilled Trades IQ
  2. Electrical Safety and Licensing Frequently Asked Questions, Texas Department of Licensing and Regulation
  3. Air Conditioning and Refrigeration Contractors, Texas Department of Licensing and Regulation
  4. Renovation, Repair and Painting Program: Contractors, U.S. Environmental Protection Agency

Keep reading